Problems with external control by home made Race-Track-Timer

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:
BBCode is ON
[img] is ON
[flash] is ON
[url] is ON
Smilies are ON
Topic review
   

If you wish to attach one or more files enter the details below.

Expand view Topic review: Problems with external control by home made Race-Track-Timer

Re: Problems with external control by home made Race-Track-T

Post by Stopwatch » Sun Jun 23, 2019 6:54 am

Pins 1 and 9 are designated to reset (it's not documented). If your stopwatch resets accidentally that means there is an electromagnetic interference to them. The same here for the unintended start/stop. Also I see the contact bounce - start and immediat stop. The same for "not stopping" - actually it stops but starts imeddiately. Try to increase the bounce time.
Stay tuned.

Problems with external control by home made Race-Track-Timer

Post by Jabse » Fri Jun 21, 2019 7:28 pm

Hello!

My english isn't pretty god. But I hope you understand me!

I am building an Race-track-timer.

But I don't know why the software starts/stops and resets the time in moments when it should not. Or it dosn't start/stop when it should be.

For example:

---> The time don't start/stop and the relay connect the RS-232 pin's (i hear and feel it). And the other way around. The relay dosn't connect the RS-232 pin's and the time starts/stops.

---> The time is reset although i only enabled start/stop funktion.

---> The time starts/stops/reset when I turn the traffic light to red. (There sould be no connection at all).

I have two videos on youtube where you can see it in action.

I hope someone can help me! Thanks in Advance!

Nr.1 https://m.youtube.com/watch?v=YWLaU6gSIT8&t=22s

Nr.2 https://m.youtube.com/watch?v=MM6mGQAIST4&t=12s

Top

cron